Jupiter, FL

Work Performed: Removed existing water heater and disconnected gas, water, and vent connections Supplied and installed new A.O. Smith ProLine commercial grade high efficiency gas water heater Installed new gas flex line and secured all gas connections Installed new water supply lines and necessary fittings for hot and cold connections Reconnected venting system and ensured proper draft and alignment Installed shut-off valve for water heater isolation Filled and pressurized system and restored water supply Lit pilot and tested unit for proper heating operation and efficiency Checked for gas and water leaks at all connections Hauled away and disposed of old water heater Tested for proper operation and ensured no leaks present Cleaned up work area upon completion.

Work Performed: Removed existing toilet and disposed of unit Inspected and prepared closet flange for new installation Installed new wax ring and closet bolts Supplied and installed new toilet Installed new water supply line Set and secured toilet ensuring proper alignment and stability Restored water supply and tested for proper flushing operation Checked for leaks at base and supply connections Cleaned up work area upon completion.

Drain & Sewer Service: Homeowner reported gurgling sounds and slow drainage from multiple fixtures. Performed a camera inspection and found partial blockage in the main sewer line due to debris buildup. Cleared the obstruction and flushed the line. System now drains properly without backup or noise.

Work Performed: Performed electric drain cleaning on sink drain line using professional drain machine Accessed drain line through under-sink piping Cleared blockage and restored proper flow to drain system Flushed line to ensure full removal of debris and buildup Inspected drain operation to confirm proper drainage Tested system for proper operation and ensured no backups present Cleaned up work area upon completion

Work Performed: Opened wall to access existing shower valve and water lines Removed faulty shower valve and any compromised fittings Supplied and installed new shower mixing valve assembly Re-piped hot and cold water lines using ProPress fittings for secure connections Ensured proper valve depth and alignment within wall cavity for trim installation Pressurized system and tested all ProPress connections for leaks Verified proper hot and cold water operation and balanced temperature control Confirmed smooth valve function and proper water flow Advised customer on drywall repair for wall restoration Cleaned up work area upon completion and removed all debris

Bathroom Plumbing Installation: Dispatched to a bathroom where the sink faucet was leaking at the base. Removed the old faucet, installed a new faucet with secure fittings, tested hot and cold water operation, and verified there were no leaks or drips.

Drain Repair: Responded to a clogged shower drain causing standing water in a bathroom. Inspected the drain line and found hair and soap residue blocking flow. Cleared the obstruction with a drain auger, flushed the line, and confirmed proper drainage and odor elimination.

Leak Repair Service: Arrived at a home with a leaking supply line behind the laundry area. Used electronic leak detection to pinpoint the source, removed the damaged section, and installed new PEX piping. Pressure-tested the system to ensure leak-free operation and reliable water flow.

Basement water line repipe completed using new copper piping. Installed new shutoff valves and properly tied into the existing water meter. All connections were secured and tested to ensure proper flow and no leaks.

Work Performed: • Supplied new Moen shower cartridge replacement • Removed existing worn shower cartridge • Installed new Moen cartridge and verified proper fit • Tested shower valve for correct operation and temperature control • Checked for leaks and ensured smooth handle operation • Cleaned up work area upon completion

Plumbing Repair Service: The customer complained of water backing up behind the washing machine during drain cycles. I found a partially clogged standpipe and a loose drain connection. I cleared the blockage, secured the drain piping, tested multiple wash cycles, and confirmed proper drainage with no overflow.

Bathroom Plumbing Installation: The homeowner requested replacement of an outdated bathtub faucet and shower valve due to rust and temperature fluctuation. I removed the old valve assembly, installed a new pressure-balanced valve, connected new supply lines, and tested for proper water temperature control and leak-free operation.

Water Heater Replacement: The existing water heater was leaking from the tank base and showed signs of internal corrosion. I removed the failed unit, installed a new energy-efficient water heater, added a new shutoff valve and thermal expansion tank, and tested the system for safe operation and consistent hot water delivery.

Water Heater Repair: The customer reported loud popping noises and inconsistent hot water output. After draining the tank, I discovered heavy sediment buildup around the heating element. I flushed the water heater thoroughly, replaced the worn heating element, inspected the thermostat, and verified improved heating performance and quiet operation.

Water Softener System Installation: Seeking a greener solution to hard water, the homeowner requested a high-efficiency water softener. I installed a low-salt-consumption system, reconfigured the supply lines, set appropriate hardness levels, and walked the client through maintenance steps for optimal eco-friendly performance.

Plumbing Repairs- Main Drain Cleaning: Arrived at the client’s property to address slow drainage and recurring backups in the main drain line. Performed a video inspection and confirmed a heavy buildup of debris obstructing flow. Used professional drain-cleaning equipment to clear the blockage and restore proper line capacity. Flushed the system to ensure smooth, unrestricted drainage and verified that all fixtures were draining normally. The main drain line is now clean and functioning properly.

Performed a video inspection on a sewer line after repeated slow drains were reported. Found root intrusion at multiple joints. Recommended hydro jetting and possible pipe lining as long-term solutions. The inspection gave the homeowner a clear view of their system’s condition.