Boynton Beach, FL

Plumbing Service: Homeowner reported frequent slab leak repairs and rising water bills over the past year. After inspection, found aging copper supply lines with multiple weak spots and corrosion throughout the system. Re-routed new PEX water lines through the attic and walls, installed updated shutoff valves, and pressure tested the entire home. Plumbing system now has dependable flow with no ongoing leak concerns.

Work Performed: • Removed existing bathroom vanity faucet fixtures from both sink locations. • Supplied and installed (2) new bathroom vanity faucets. • Removed old drain assemblies as needed for faucet replacement. • Installed new pop-up drain assemblies for both sinks. • Connected new hot and cold water supply lines to each faucet. • Secured both faucet bodies to vanity countertop and properly aligned fixtures. • Reconnected drain piping beneath both sinks as needed. • Checked all faucet connections supply lines drain assemblies and visible plumbing connections. • Tested both faucets for proper hot and cold water operation. • Filled and drained both sinks to verify proper drainage. • Inspected underneath vanity area to ensure no leaks were present. • Cleaned up work area upon completion.

Work Performed: • Completed full bathroom remodeling project including demolition, preparation, plumbing, tile installation, fixture installation, glass installation, finish work, and final cleanup. • Removed existing bathroom finishes, fixtures, flooring, shower materials, vanity area components, and outdated trim as needed to prepare for full remodel. • Performed wall and floor preparation throughout bathroom to ensure proper surface conditions for new tile, fixtures, and finished materials. • Completed shower and tub area build-out including wall preparation, floor preparation, waterproofing, and finish layout. • Installed new shower wall tile with detailed layout, cutting, fitting, and finished edges. • Installed new shower floor tile with proper pitch and clean finished appearance. • Installed new tub surround tile and completed tile work around bathing area. • Installed recessed shower niche with finished tile detail for built-in storage. • Installed new shower valve t

Work Performed: • Supplied and installed one new Kohler Gleam toilet in bathroom area. • Removed existing toilet and prepared the toilet connection area for the new installation. • Cleaned and inspected existing toilet flange area prior to setting the new toilet. • Installed new wax ring seal to create a proper watertight seal between the toilet and drain flange. • Set new Kohler Gleam toilet in place and carefully aligned toilet with the existing floor flange and drain opening. • Secured toilet to floor using new toilet bolts and tightened properly to ensure the toilet was stable and properly seated. • Installed and connected toilet tank to bowl assembly. • Connected water supply line to toilet fill valve and existing shutoff valve. • Adjusted internal toilet components to allow proper filling and flushing operation. • Tested toilet multiple times to confirm proper flush performance. • Verified toilet was filling properly and shutting off correctly aft

Scope of Work Estimate: * Supply and install (1) new 50-gallon electric water heater. * Manufacturer: A.O. Smith. * Includes 6-year manufacturer warranty. * Remove and haul away existing water heater. * Supply and install new shutoff valves as needed. * Supply and install (1) 2 lb thermal expansion tank. * Includes all necessary materials, fittings, piping, and labor required for proper installation. * Connect water heater to existing plumbing and electrical connections. * Fill and test system for proper operation. * Inspect all connections to ensure there are no leaks. * Clean up work area upon completion.

Work Performed: • Installed new kitchen sink faucet • Secured faucet body and trim for proper fit and alignment • Connected hot and cold water supply lines • Checked faucet handle and sprayer function for proper operation • Tested water flow and temperature control • Inspected all visible faucet and supply connections for leaks • Confirmed sink and faucet were operating properly upon completion • Cleaned up work area upon completion.

Work Performed: Removed existing malfunctioning water heater access panel and inspected internal heating components. Diagnosed failed upper heating element and thermostat assembly causing loss of hot water. Supplied and installed new manufacturer compatible heating element. Supplied and installed new upper thermostat/control assembly. Verified proper wiring connections and secured all electrical terminals. Reinstalled service access panel and insulation cover. Filled and purged tank as needed prior to energizing unit. Tested heater through full heating cycle to confirm proper operation. Checked surrounding plumbing connections for leaks and proper function. Tested for proper operation and ensured no leaks present. Cleaned up work area upon completion.

Work Performed: Arrived on site and inspected floor drain line due to blockage and slow drainage issues. Removed drain cover and accessed existing floor drain opening. Performed professional drain cleaning service using commercial cable machine equipment. Cleared blockage from drain line and restored proper flow through waste piping. Broke through grease sludge debris and buildup located within drain line. Flushed drain line with water to verify improved drainage performance. Inspected surrounding piping connections and trap assembly for proper operation. Reinstalled drain components and secured drain opening area. Tested system multiple times to confirm line draining properly. Verified no backups present at time of service. Cleaned work area upon completion.

Work Performed: * Supplied and installed (1) new 1/2 HP American Standard garbage disposal unit. * Removed existing disposal and disconnected old mounting assembly. * Supplied and installed new sink basket strainer assembly. * Installed new disposal with proper mounting hardware and electrical connection. * Supplied and installed new sink drain tailpiece for updated connection to disposal discharge. * Checked all drain and disposal connections for leaks. * Tested garbage disposal for proper operation and smooth performance. * Cleaned up work area upon completion

Work Performed: • Supplied and professionally installed new AO Smith 50 Gallon 100 Series Water Heater • Removed and properly disposed of existing water heater unit • Installed new 2-pound thermal expansion tank to protect plumbing system from thermal pressure buildup • Connected hot and cold water supply lines with new fittings and secure connections • Installed necessary shutoff valve and ensured proper operation • Filled system and tested for proper heating performance • Inspected all connections and verified no leaks present • Brought installation up to current plumbing standards and code compliance • Tested for proper operation and ensured no leaks present • Cleaned up work area upon completion.

Work Performed: • Disconnected and safely removed existing water heater from service • Inspected existing plumbing connections, shut-off valves, and electrical components for proper condition and code compliance • Installed customer-supplied 50-gallon electric water heater in designated location • Installed new shut-off valve at water heater for improved isolation and serviceability • Installed new 2 lb thermal expansion tank to protect plumbing system from excess pressure buildup • Reconnected hot and cold water supply lines with necessary fittings and secure connections • Reconnected electrical supply and verified proper voltage and safe operation • Filled unit, purged air from system, and brought water heater up to operating temperature • Tested system thoroughly to confirm proper functionality and ensure no leaks are present • Verified proper operation of temperature and pressure relief valve (T&P valve) • Confirmed system is operating within manufacturer specifications

Work Performed: Removed existing toilet and disconnected water supply Inspected closet flange and prepared area for installation Installed new wax ring and closet bolts Supplied and installed new toilet Installed new water supply line Set and secured toilet ensuring proper alignment and stability Restored water supply and tested for proper flushing operation Checked for leaks at base and supply connections Verified proper fill and shutoff function Cleaned up work area upon completion.

Work Performed: Removed existing kitchen faucet assembly Supplied and installed new customer-selected kitchen faucet Installed new water supply lines and secured all connections Verified proper alignment and mounting to sink surface Restored water supply and tested for proper operation Checked for leaks at all connection points Cleaned up work area upon completion.

Scope of Work Estimate: -Installation of AIO Filtration System for Well Irrigation -Supply and install (1) AIO (Air Injection Oxidation) filtration system on existing well irrigation system -Includes all necessary parts, materials, labor, and full installation -System will be specially ordered to meet project requirements -Installation will be completed in accordance with manufacturer specifications and local plumbing standards -System will be tested for proper operation upon completion -Clean up work area after installation

Work Performed: • Installed new American Standard 1/2 HP continuous feed garbage disposal (unit supplied by Florida Flush Plumbing) • Secured mounting assembly and connected disposal to existing drain system • Installed customer-supplied multi-stage water filtration system under sink • Connected filtration system to cold water supply and dedicated outlet line • Ensured all plumbing connections were properly sealed and secured • Tested disposal for proper operation and verified filtration system functionality • Checked for leaks and confirmed all components operating correctly • Cleaned up work area upon completion

Work Performed: • Shut off water supply to toilet and drained tank completely • Removed existing faulty flush valve assembly and flapper • Cleaned tank seating surface to ensure proper seal • Supplied and installed new Fluidmaster universal adjustable flush valve kit with 2-inch flapper • Adjusted flush valve height and components for proper fit and performance • Reconnected tank components and restored water supply • Tested multiple flush cycles to verify proper operation and sealing • Verified no leaks present at tank or connections • Cleaned up work area upon completion

Work Performed: • Inspected handheld shower hose and connection at diverter/body • Identified loose/disconnected hose causing improper operation • Reconnected handheld shower hose to proper fitting • Secured connection to ensure tight seal and proper alignment • Tested handheld shower and main showerhead for proper function • Verified no leaks present at connection points • Ensured proper water flow and operation of diverter • Cleaned up work area upon completion

Plumbing Service: Arrived at a home experiencing recurring slow drains throughout multiple fixtures. Inspected main drain lines and found heavy grease and sludge buildup. Performed a full hydro-jetting service to clean the interior pipe walls. Verified improved flow and long-term drainage performance.

Work Performed: Supplied and professionally installed (1) new kitchen faucet Removed existing faucet and cleaned mounting surface Installed new faucet with all necessary hardware and secure connections Installed new soap dispenser and secured in countertop Reconnected hot and cold water supply lines Checked and ensured proper water flow and pressure Tested for proper operation and ensured no leaks present Cleaned up work area upon completion

Work Performed: Supplied and professionally installed (1) freestanding soaking tub Positioned and leveled tub for proper installation and support Installed freestanding tub filler with handheld attachment Connected hot and cold water supply lines to tub filler Installed and connected tub drain assembly to existing waste line Secured all fittings and ensured proper alignment Tested tub and faucet for proper operation and ensured no leaks present Verified proper drainage and water flow Cleaned up work area upon completion

Work Performed: • Installed (1) customer supplied Badger garbage disposal unit at kitchen sink • Installed (1) customer supplied Sink Creator garbage disposal unit at adjacent basin of double sink • Installed (1) customer supplied sink strainer on opposite side of double sink for proper drainage and sealing • Installed (1) customer supplied fill valve at one commode to restore proper tank operation and water control • Secured all connections and ensured proper alignment of all installed components • Tested all installations for proper operation and confirmed no leaks present • Cleaned up work area upon completion

Work Performed: • Shut off water supply and safely drained down the hot water system • Removed existing shutoff valve at the water heater connection • Supplied and installed (1) new high quality ball valve shutoff for improved reliability and ease of operation • Reconnected water lines and secured all fittings properly • Restored water service and tested valve operation for proper functionality • Inspected for leaks and verified system is operating correctly • Cleaned up work area upon completion